datasheet | december 2013 fiber optics | rev 2013.12 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications high-performance supertrunking links high power distri bution networks redundant ring architectures fttx networks features fully functioning edfa gain block (preamp) standard rs-232 communication low electrical power consumption output isolation >40 db polarization dependent gain <0.1 db polarization mode dispersion <0.5 ps emcore?s mafa 2100 pa series micro erbium doped fiber pre-amplifier is an ideal building block for oem system integrators. the family of mafa 2100 pa series preamps is designed to meet the most demanding nois e performance requirements of any fiber link application, and perform all the functions required of an optical preamplifier for system integration. the mafa 2100 pa series provides optical isolation on t he output of the gain block for stable, low noise operation. the out put optical signal power levels are detected for monitoring and control. the mafa 2100 pa series also provides monitors and associated alarms for all vital characteristics. optical/electrical characteristics 1 property unit limit model - 2114 pa comments operating input power pin (dbm) max 0 - operating input power pin (dbm) min -45 - saturated output power po(dbm) min 14 (note 3) operating wavelength range nm min/max 1530 ? 1562 nominal noise figure nf (db) max 3.3 (note 2) power consumption psys (w) max 8 +85 o c case notes: 1. unless stated otherwise al l specifications apply over the full temperature range and humidity. 2. measured @ 1550 nm, pin -30 dbm and @ 25 c 3. measured @ pin = -4 dbm mafa 2100 pa series edfa micro erbium doped fiber pre-amplifier
datasheet | december 2013 fiber optics | rev 2013.12 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. general and mechanical specifications property requirement comments operating wavelength 1530 nm ~ 1562 nm standard operating case temperature -40 ? c to 85 ? c standard storage temperature -40 ? c to 85 ? c standard operating humidity 20% to 85% non-condensing voltage supply range +4.5 v to +5.5 vdc standard optical connectors sc/apc; sc/upc; fc/apc; fc/upc; e2000/apc user specified dimensions (in) 4.9?w x 5.9?d x 0.8?h mafa 2014 -pa outline drawing mafa 2100 pa series edfa micro erbium doped fiber pre-amplifier
datasheet | december 2013 fiber optics | rev 2013.12 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. electrical connector pinout pin # designation pin # designation 1 dc power input (+5 v) 16 reserved 2 gnd 17 reserved 3 reserved 18 rs-232 rx* 4 reserved 19 reserved 5 reserved 20 reserved 6 rs-232 tx 21 reserved 7 reserved 22 reserved 8 reserved 23 reserved 9 reserved 24 n/a 10 reserved 25 reserved 11 reserved 12 reserved 13 reserved 14 dc power input (+5 v) 15 gnd compliance and reliability information fcc: subpart b. part 15 class ?a ?: unintentional radiators en 61000-4-3: electromagnetic compatibility (emc) part 4: testing and measurement techniques ? se ction 3: radiated immunity (1996) en 55013: sound and television broadcast receivers and associated eq uipment ? radio disturbance characteristics- limits and methods of measurements ? electric field radiation emissions (2001) fit rate: 60% level of confidence 670 @ 25 ? c fit rate: 60% of level of confidence 962 @ 40 ? c ordering information mafa2014 - - pa connector option sc - sc/apc fc - fc/apc ec ? e2000/apc tc ? sc/upc gc ? fc/upc mafa 2100 pa series edfa micro erbium doped fiber pre-amplifier
|
